My E11 Blaster Build.WIP

Ideas, tutorials, questions relating to armour, costumes and replica props from the Star Wars universe

My E11 Blaster Build.WIP

Postby TIE1138 » Wed Oct 11, 2017 9:23 pm

Hi all. It's been a while and started this build 3rd Sept after a visit to Ootas place. Managed to get some seconds in the way of most components for this build and together with a pvc tube that already had the holes drilled in it, I decided to get on with it.
Motivation is the name of the game, and when I saw what Oota was doing, it spured me on.
So, the first thing to do was to mark out the position of the grip and tidy this up with a lot of sanding to even up the front and rear faces as these were out of alinment during the fabrication stage. after tidying this area, I stuck some sandpaper to the outer barrel tube and began to sand and shape the top face that will be secured to the tube. I drilled a large hole through the top of the tube so that I could screw the grip to the tube when ready. I then worked on the magazine housing and did similar work to this as the grip.
Attachments
20170903_154918.jpg
20170903_154918.jpg (632.93 KiB) Viewed 110 times
20170903_154750.jpg
20170903_154750.jpg (620.37 KiB) Viewed 110 times
20170903_154800.jpg
20170903_154800.jpg (546.47 KiB) Viewed 110 times
20170903_154820.jpg
20170903_154820.jpg (524.25 KiB) Viewed 110 times
User avatar
TIE1138
Ensign
 
Posts: 91
Joined: Sat Aug 08, 2015 10:02 pm
Location: Wanganui

Re: My E11 Blaster Build.WIP

Postby Blaxmyth » Wed Oct 11, 2017 9:57 pm

Looking very tidy! Keep the pics coming, please. :)
User avatar
Blaxmyth
Lieutenant
 
Posts: 171
Joined: Fri Oct 08, 2010 10:13 pm
Location: Wanganui

Re: My E11 Blaster Build.WIP

Postby oota goota » Thu Oct 12, 2017 9:41 am

what blax said looks great Nick. I'll try and sort those other bits out for you soon I'm going to do another casting session
User avatar
oota goota
High Colonel
 
Posts: 1892
Joined: Tue Mar 23, 2010 1:08 pm
Location: Taranaki

Re: My E11 Blaster Build.WIP

Postby MattG » Thu Oct 12, 2017 9:43 am

Agreed - it's looking good already. Look forward to seeing your ongoing progress.
User avatar
MattG
Site Admin
 
Posts: 4352
Joined: Tue Nov 10, 2009 6:46 pm
Location: North Shore City

Re: My E11 Blaster Build.WIP

Postby TIE1138 » Thu Oct 12, 2017 5:43 pm

Thanks guys. Yes I am very happy with what I have done to date, bearing in mind that this blaster will have light differences to others out there, but then that's me.
next came the Bolt. Oota gave me a cast one from a real Sterling but I thought that it would be a shame to cover up all that detail, so I made one from wood and put detail where it would be seen. I then added a pvc tube to the end for the spring to go inside and applied a couple of strips of foil tape over the seen areas and I thought it turned out quite well.
Attachments
20170923_104008.jpg
After blowing some primer on it
20170923_104008.jpg (659.65 KiB) Viewed 84 times
20170917_160044.jpg
Sprayed some silver over the bolt
20170917_160044.jpg (671.09 KiB) Viewed 85 times
20170917_155053.jpg
Filling and shaping the extractor slot
20170917_155053.jpg (592.16 KiB) Viewed 85 times
20170917_154243.jpg
The pvc tube after gluing with urathane adhesive.
20170917_154243.jpg (546.31 KiB) Viewed 85 times
20170917_154232.jpg
20170917_154232.jpg (677.22 KiB) Viewed 85 times
User avatar
TIE1138
Ensign
 
Posts: 91
Joined: Sat Aug 08, 2015 10:02 pm
Location: Wanganui

Re: My E11 Blaster Build.WIP

Postby TIE1138 » Thu Oct 12, 2017 6:42 pm

Below is a pic of the bolt with the Foil Tape on it.
Attachments
20171012_183409.jpg
20171012_183409.jpg (679.47 KiB) Viewed 83 times
User avatar
TIE1138
Ensign
 
Posts: 91
Joined: Sat Aug 08, 2015 10:02 pm
Location: Wanganui

Re: My E11 Blaster Build.WIP

Postby oota goota » Fri Oct 13, 2017 5:54 pm

very cool idea using foil tape can't wait to see this in person one day
User avatar
oota goota
High Colonel
 
Posts: 1892
Joined: Tue Mar 23, 2010 1:08 pm
Location: Taranaki

Re: My E11 Blaster Build.WIP

Postby TIE1138 » Tue Oct 17, 2017 6:52 pm

Thanks Oota. Well the next step was to do the T Rails and I found a length of Aluminium T track in the garage that I bought about & years ago. After measuring the lengths of each, I cut up the track and shaped the ends with a file.I then worked out which holes they would cover and marked the end ones so that I could fill these in with wooden dowel pieces to help adhere the track to the PVC tube using Araldite SS epoxy.
Attachments
20170923_203312.jpg
20170923_203312.jpg (709.29 KiB) Viewed 36 times
20170923_213301.jpg
20170923_213301.jpg (733.17 KiB) Viewed 36 times
20170923_200842.jpg
20170923_200842.jpg (681.21 KiB) Viewed 36 times
20170923_195702.jpg
20170923_195702.jpg (732.96 KiB) Viewed 36 times
20170923_193940.jpg
20170923_193940.jpg (623.87 KiB) Viewed 36 times
User avatar
TIE1138
Ensign
 
Posts: 91
Joined: Sat Aug 08, 2015 10:02 pm
Location: Wanganui

Re: My E11 Blaster Build.WIP

Postby TIE1138 » Tue Oct 17, 2017 6:54 pm

I the photo below you can see the dowels glued in place using Superglue which also seals the timber.
Attachments
20170928_190411.jpg
20170928_190411.jpg (677.47 KiB) Viewed 33 times
User avatar
TIE1138
Ensign
 
Posts: 91
Joined: Sat Aug 08, 2015 10:02 pm
Location: Wanganui

Re: My E11 Blaster Build.WIP

Postby badges2nz » Tue Oct 17, 2017 6:55 pm

Nice work there Nick, I love the t tracks
Doomsday and Armageddon got together and had a baby and man is it ugly.
User avatar
badges2nz
High Colonel
 
Posts: 1017
Joined: Fri Jul 23, 2010 11:35 pm
Location: Otaki

Next

Return to Costumes and Props

Who is online

Users browsing this forum: No registered users and 0 guests

cron