My modelling skills are still pretty fledgling, but I recently added a new resource to my arsenal: Humbrol weathering powder. Around the same time I noticed that, despite being kept out of direct sunlight, one of my favourite figures - a Vintage Collection R2-D2 - had succumbed to the dreaded plastic yellowing. I decided to dirty him up a bit using some of the aforementioned powder, and I'm really happy with the results. The yellowing has been completely incorporated into the weathering, and the added grime brings out a lot of details in this figure that weren't as prominent when he was entirely clean.
Unfortunately, photos don't show off the finer shading of the weathering all that well - but hopefully you'll get the idea. You can read more about my process here.
One way to fix an R2-D2 with yellowing plastic...
- Archon Revuge
- High Colonel
- Posts: 1429
- Joined: Fri Jan 08, 2010 1:03 am
- Country: USA
- Contact:
One way to fix an R2-D2 with yellowing plastic...
- Attachments
-
- R2-D2 Weathering 1.JPG (1.57 MiB) Viewed 6303 times
-
- R2-D2 Weathering 2.JPG (1.81 MiB) Viewed 6303 times
-
- R2-D2 Weathering 3.JPG (1.36 MiB) Viewed 6303 times
-
- R2-D2 Weathering 4.JPG (596.88 KiB) Viewed 6303 times
-
- R2-D2 Weathering 5.JPG (1.6 MiB) Viewed 6303 times
- batmanreturns
- Ensign
- Posts: 63
- Joined: Sun Aug 24, 2014 2:46 am
- Country: new zealand
Re: One way to fix an R2-D2 with yellowing plastic...
hiding the yellowing using paint is one way to solve this issue yes.
if you have vintage figures etc,and want to use a technique that works properly,i can suggest the method i have used in the past.
you will need regular toothpaste [as a medium] and a small amount of hydrogen peroxide. [35% h.p]
mix the h.p with the toothpaste to create a thickish paste,and apply the mix to the figures yellowed parts with a small brush.
put the piece in direct sunlight for at least 30 minutes,wash off,then re-apply the mix if you need to.
note that hydrogen peroxide is corrosive to skin,so use gloves and use with caution.
i have never seen this mix damage the plastic on the figures by the way.
i was able to completely restore my vintage figures that had yellowed with this method. several applications were required usually,
but the end result was very pleasing.
this technique works, hope this helps.
cheers.
if you have vintage figures etc,and want to use a technique that works properly,i can suggest the method i have used in the past.
you will need regular toothpaste [as a medium] and a small amount of hydrogen peroxide. [35% h.p]
mix the h.p with the toothpaste to create a thickish paste,and apply the mix to the figures yellowed parts with a small brush.
put the piece in direct sunlight for at least 30 minutes,wash off,then re-apply the mix if you need to.
note that hydrogen peroxide is corrosive to skin,so use gloves and use with caution.
i have never seen this mix damage the plastic on the figures by the way.
i was able to completely restore my vintage figures that had yellowed with this method. several applications were required usually,
but the end result was very pleasing.
this technique works, hope this helps.
cheers.
"never be afraid to raise your voice for honesty and truth and compassion against injustice and lying and greed. if people all over the world would do this....it would change the earth." -w.faulkner.
- MattG
- Site Admin
- Posts: 4921
- Joined: Tue Nov 10, 2009 5:46 am
- Country: New Zealand
- Location: Auckland
Re: One way to fix an R2-D2 with yellowing plastic...
Your weathering looks nice Archon.
I personally haven't gotten around to experimenting with peroxide myself (mainly because I haven't found an immediately convenient source of the right concentration). Each approach serves a different goal and preference, I guess.
I personally haven't gotten around to experimenting with peroxide myself (mainly because I haven't found an immediately convenient source of the right concentration). Each approach serves a different goal and preference, I guess.
Matt G
My Trade/Want List
Website: www.SWNZ.co.nz
Facebook: Facebook.com/StarWarsNZ
Twitter: @StarWarsNZ
My Trade/Want List
Website: www.SWNZ.co.nz
Facebook: Facebook.com/StarWarsNZ
Twitter: @StarWarsNZ
- Archon Revuge
- High Colonel
- Posts: 1429
- Joined: Fri Jan 08, 2010 1:03 am
- Country: USA
- Contact:
Re: One way to fix an R2-D2 with yellowing plastic...
Thanks for the heads up on this! I've got several other yellowing figures that wouldn't really be suited to the "cover it up with weathering" technique, so I may have to give the approach you suggested a try...batmanreturns wrote:i was able to completely restore my vintage figures that had yellowed with this method. several applications were required usually,
but the end result was very pleasing.
this technique works, hope this helps.
- batmanreturns
- Ensign
- Posts: 63
- Joined: Sun Aug 24, 2014 2:46 am
- Country: new zealand
Re: One way to fix an R2-D2 with yellowing plastic...
cheers archon,
the weathering on your figure looks really good,as matt said.
i use h.p on an almost daily basis in my work,so i understand the chemistry behind it.
the h.p bombards the plastic with oxygen molecules, but as a chemical,is neither acidic nor alkili, so it usually wont
damage plastics [unless its over-applied]
the toothpaste needs to be mixed in as a medium only,and the idea is to get as much h.p in the mix without the batch becoming too thin to apply properly.
also, putting the figure in bright sunlight is vital to the chemical reaction that takes place.
the h.p usually remains active only for around half an hour, after which,it can be washed off,and if you require,another
batch can be made up,and applied.
i source my h.p from hamchem, here in hamilton. the trade name for the product is 'steripure' and the h.p content is about 35%
if memory serves me correctly. [edit: i dont believe it falls under the DG act either (dangerous goods) so should be able to be shipped to you without any issues]
i usually pay $20.00 for a litre.
glad to help,i was eager to put this up here when i saw your thread,as i have tried this technique myself,and reckon the results are
brilliant.
cheers.
the weathering on your figure looks really good,as matt said.
i use h.p on an almost daily basis in my work,so i understand the chemistry behind it.
the h.p bombards the plastic with oxygen molecules, but as a chemical,is neither acidic nor alkili, so it usually wont
damage plastics [unless its over-applied]
the toothpaste needs to be mixed in as a medium only,and the idea is to get as much h.p in the mix without the batch becoming too thin to apply properly.
also, putting the figure in bright sunlight is vital to the chemical reaction that takes place.
the h.p usually remains active only for around half an hour, after which,it can be washed off,and if you require,another
batch can be made up,and applied.
i source my h.p from hamchem, here in hamilton. the trade name for the product is 'steripure' and the h.p content is about 35%
if memory serves me correctly. [edit: i dont believe it falls under the DG act either (dangerous goods) so should be able to be shipped to you without any issues]
i usually pay $20.00 for a litre.
glad to help,i was eager to put this up here when i saw your thread,as i have tried this technique myself,and reckon the results are
brilliant.
cheers.
"never be afraid to raise your voice for honesty and truth and compassion against injustice and lying and greed. if people all over the world would do this....it would change the earth." -w.faulkner.
- Archon Revuge
- High Colonel
- Posts: 1429
- Joined: Fri Jan 08, 2010 1:03 am
- Country: USA
- Contact:
Re: One way to fix an R2-D2 with yellowing plastic...
It's great to hear this from someone in the know. While I was aware of this process, I'd always been a little too daunted to try it!batmanreturns wrote:i use h.p on an almost daily basis in my work,so i understand the chemistry behind it.
the h.p bombards the plastic with oxygen molecules, but as a chemical,is neither acidic nor alkili, so it usually wont
damage plastics [unless its over-applied]
- batmanreturns
- Ensign
- Posts: 63
- Joined: Sun Aug 24, 2014 2:46 am
- Country: new zealand
Re: One way to fix an R2-D2 with yellowing plastic...
a while back,i aquired a set of the original [11-12 ?] 1977 kenner figures,with the intention of restoring the set to 'as new'
condition.
i had the opinion that i would have to live with the yellowing, so the discovery of this method was a real 'bolt of lightning' to me.
its a game changer i reckon.
i have used this method on my vintage collection of nintendo game & watch games also,with the same epic results.
also of note: the method didnt seem to upset,or affect the other paint colors on the vintage figures.
anyways,i have exhausted any further useful input from myself into this thread, thankyou for putting up the subject, i have been very keen to share this info since discovering it myself.
stay groovy, MTFBWY.
condition.
i had the opinion that i would have to live with the yellowing, so the discovery of this method was a real 'bolt of lightning' to me.
its a game changer i reckon.
i have used this method on my vintage collection of nintendo game & watch games also,with the same epic results.
also of note: the method didnt seem to upset,or affect the other paint colors on the vintage figures.
anyways,i have exhausted any further useful input from myself into this thread, thankyou for putting up the subject, i have been very keen to share this info since discovering it myself.
stay groovy, MTFBWY.
"never be afraid to raise your voice for honesty and truth and compassion against injustice and lying and greed. if people all over the world would do this....it would change the earth." -w.faulkner.